Somos PerFORM
Unionfab PerFORM can mold composite parts with high strength, high stiffness and excellent high temperature resistance on standard 355 nm stereolithography (SLA) equipment. The material has a low viscosity, which helps improve printing processing efficiency. Its sidewall quality is excellent, and its detail resolution is better than other similar composite light-curing materials.
Dimensional Stability
High Strength
Rigidity
Surface Quality
Lead Time
5~7 days
Tolerance
± 0.2% (minimum of ± 0.2mm)
Min. Order
1
Reference Unit Price Range
0.54 - 1.20
Advantages
- High Strength
- Dimensional Stability
- Rigidity
Disadvantages
- Higher cost
- Limited weather resistance
- Limited chemical resistance
- Limited wear resistance
- Limited toughness
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
Surface Quality
ممتازدرجة التقييم: 5/5
High Strength
ممتازدرجة التقييم: 5/5
Rigidity
ممتازدرجة التقييم: 5/5
Dimensional Stability
مرتفعدرجة التقييم: 4/5
Heat Resistance
متوسطدرجة التقييم: 3/5
Moisture Resistance
متوسطدرجة التقييم: 3/5
Cost Efficient
منخفضدرجة التقييم: 2/5
Weather Resistance
منخفضدرجة التقييم: 2/5
Corrosion Resistance
منخفضدرجة التقييم: 2/5
Surface Finish Options
Surface Finish Options
Available finish options for Somos PerFORM.
As Printed
Color
Off-White
Surface
Ra 2-5 μm (as printed)
Accuracy
± 0.2% (minimum of ± 0.2mm)
Painting
Finish options
Glossy and matte paint finishes available
Best for
إضافة لون مخصص وطبقة طلاء واقية إلى قطع Somos PerFORM من أجل اختبارات النماذج الأولية الوظيفية.
Note
التحقق من التصاق الطلاء وحدات القناع وتغطية الطبقة على Somos PerFORM قبل الإنتاج، خاصة حول الواجهات والحواف والتفاصيل الدقيقة.
Silk Screening
Print method
Single- or multi-color graphics on flat or gently curved surfaces
Best for
تطبيق الشعارات والملصقات أو الرسومات الوظيفية على المسطحات من قطع Somos PerFORM المستخدمة من أجل اختبارات النماذج الأولية الوظيفية.
Note
تأكيد المساحة القابلة للطباعة والتصاق الحبر وتسجيل الرسومات على Somos PerFORM قبل الإنتاج.
Vacuum Plating
Finish options
Glossy and matte plated finishes available
Best for
إنشاء تشطيب معدني عاكس على قطع Somos PerFORM من أجل اختبارات النماذج الأولية الوظيفية والتصنيعات التي تركز على المظهر.
Note
تأكيد تغطية مجال الرؤية والقناع والتصاق الطلاء المعدني على Somos PerFORM قبل الإنتاج.
Polishing
Surface result
Smoother, glossier visible surfaces where geometry allows
Best for
تحسين النعومة واللمعان على قطع Somos PerFORM المستخدمة من أجل اختبارات النماذج الأولية الوظيفية، حيثما تسمح الهندسة بذلك.
Note
تأكيد الحفاظ على الحواف والتأثير البعدي على Somos PerFORM؛ قد تختلط التفاصيل الدقيقة أثناء التلميع.
Industries & Applications
Where Somos PerFORM Delivers
Medical & Dental
- Educational and training models
- Fit-check and workflow prototypes
- Non-implantable demonstration components
- Custom low-volume development parts
Education
- Appearance and display models
- Classroom demonstration models
- Hands-on design projects
Research & Development
- Functional prototype testing
- Assembly testing
- Experimental prototype components
Consumer Electronics
- Product enclosure prototypes
- Fit-check and assembly models
- Custom test fixtures
- Low-volume concept validation builds
Technical Specifications
Design Guidelines
Material Properties
Process & Dimensional Specs
Ready to Order?
Upload your 3D file and receive a quote for Somos PerFORM parts. Typical turnaround is 5~7 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
تحدث مع مهندس عمليات
هل لديك متطلبات تفاوتات ضيقة أو أشكال هندسية معقدة؟ يُراجع مهندسونا رسوماتك قبل تقديم العرض للإشارة إلى المشكلات المحتملة.
Compare & Decide
Related & Alternative Materials
SLA · Resins
High-temp-220D Resin
SLA · Beige
High-temp-220D resin is a specialty resin designed for SLA 3D printing. The material has excellent heat resistance, and after simple post-processing, its heat distortion temperature (HDT) can reach up to 227°C. At the same time, the resin also has excellent dimensional accuracy and reliable surface quality, making it an ideal choice for high-temperature and demanding applications such as wind tunnel testing, impellers, motor components, and rapid mold manufacturing.
SLA · Resins
High-temp-150D Resin
SLA · Transparent Red
High-temp-150D resin is a red, transparent, low-viscosity liquid stereolithography (SLA) resin. Its molded parts have excellent high-temperature resistance and can be used at temperatures up to 150°C under no-load conditions. Its toughness is slightly worse than other industrial prototyping materials, and it is not suitable for printing thin-walled parts of 0.3 mm and below. It is suitable for printing temperature-resistant samples such as rapid molds and electroplating. The material is particularly suitable for making high-resolution, strong models and is widely used in industries that have strict requirements on temperature resistance, such as high-temperature baking paint, electroplating processes and rapid mold manufacturing.
SLA · Resins
Rigid Resin
SLA · White&Black
Rigid Resin (white) has the characteristics of high hardness, smooth surface, strong detail expression, dimensional stability, strong chemical resistance and high precision. Its molded products can be used in high-humidity environments.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICP备17023219号-3Region: -, Version: 26.09.0202
