Important Notice!! Our Printing Capacity and Shipping are normally operating Despite the lockdown across China.

 

Unionfab Product & Service

Unionfab How to Work with Us

How to Work with Unionfab
  • Upload Your 3D Design To start, Kindly select a manufacturing process and upload your 3D file.
    We can accept the following file types: .obj .stp .stl
  • The design file is Analyzed We'll send you the design for manufacturability (DFM) analysis and real-time pricing within a few hours.
    Our interactive quote will call out any challenging to manufacture features based on the manufacturing process you have selected, along with accurate pricing.
  • Production Begins After reviewing your quote, then proceed to place your order. We'll start the manufacturing process.
    These can range from Plating and Silk Screening to basic assembly and threaded inserts.
    Silk Screening Laser Marking Plating Painting
  • Parts Shipped To You Our High intelligent printers allow us to produce parts within 8 hours and ready to ship Get Started
  • MULTI COLOR RESIN

    MULTI COLOR RESIN

    POLYJET

    MULTI COLOR RESIN

  • SLS TPU

    SLS TPU

    SLS

    SLS TPU

  • SLS NYLON PA12

    SLS NYLON 12 (White)

    SLS

    SLS NYLON 12 (White)

  • SLS NYLON PA12

    SLS NYLON 12 (Black)

    SLS

    SLS NYLON 12 (Black)

  • SLS NYLON PA11(Black)

    SLS

    SLS NYLON PA11(Black)

  • SLS NYLON PA11

    SLS NYLON PA11(Solid White)

    SLS

    SLS NYLON PA11(Solid White)

  • GLASS FILLED NYLON

    GLASS FILLED NYLON (Black)

    SLS

    GLASS FILLED NYLON (Black)

  • GLASS FILLED NYLON

    GLASS FILLED NYLON (Light Gray)

    SLS

    GLASS FILLED NYLON (Light Gray)

  • View More
    MULTI COLOR RESIN
    • Material
      MULTI COLOR RESIN
    • Process
      POLYJET
    • Advantage

      Ultra-sharp graphics
      Smoother texture
      Full Colo
      Stunning Sharpness

    • Weakness

      Low material strength
      High Price

    SLS TPU
    • Material
      SLS TPU
    • Process
      SLS
    • Advantage

      High strength
      High abrasive resistance

    • Weakness

      High cost

    SLS NYLON PA12
    • Material
      SLS NYLON 12 (White)
    • Process
      SLS
    • Advantage

      High temperature resistance, good toughness and high strength, can be used as functional parts. No support is required during printing, suitable for product proofing with extremely complex structure

    • Weakness

      Uncoated prints suck moisture and dust from the air, change color and degrade over time
      Some variations of material experience disproportional shrinkage while printing or cooling

    SLS NYLON PA12
    • Material
      SLS NYLON 12 (Black)
    • Process
      SLS
    • Advantage

      High temperature resistance, good toughness and high strength, can be used as functional parts. No support is required during printing, suitable for product proofing with extremely complex structure

    • Weakness

      Uncoated prints suck moisture and dust from the air, change color and degrade over time
      Some variations of material experience disproportional shrinkage while printing or cooling

    • Material
      SLS NYLON PA11(Black)
    • Process
      SLS
    • Advantage

      The material has high temperature resistance, good dimensional stability, good toughness, good insulation, good corrosion resistance and high mechanical strength

    • Weakness

      Uncoated prints suck moisture and dust from the air, change color and degrade over time
      Some variations of material experience disproportional shrinkage while printing or cooling

    SLS NYLON PA11
    • Material
      SLS NYLON PA11(Solid White)
    • Process
      SLS
    • Advantage

      The material has high temperature resistance, good dimensional stability, good toughness, good insulation, good corrosion resistance and high mechanical strength

    • Weakness

      Uncoated prints suck moisture and dust from the air, change color and degrade over time
      Some variations of material experience disproportional shrinkage while printing or cooling

    GLASS FILLED NYLON
    • Material
      GLASS FILLED NYLON (Black)
    • Process
      SLS
    • Advantage

      The material has high temperature resistance, good dimensional stability, good toughness, good insulation, good corrosion resistance and high mechanical strength

    • Weakness

      The surface is grainy, and the colour of the product is greatly affected by the material and temperature

    GLASS FILLED NYLON
    • Material
      GLASS FILLED NYLON (Light Gray)
    • Process
      SLS
    • Advantage

      The material has high temperature resistance, good dimensional stability, good toughness, good insulation, good corrosion resistance and high mechanical strength

    • Weakness

      The surface is grainy, and the colour of the product is greatly affected by the material and temperature

  • Polycarbonate(PC)

    CNC

    Polycarbonate(PC)

  • HDPE

    CNC

    HDPE

  • PolyVinyl Chloride PVC

    CNC

    PolyVinyl Chloride PVC

  • Copper

    CNC

    Copper

  • PTFE

    CNC

    PTFE

  • PEEK

    PEEK

  • Graphite HPG-53

    CNC

    Graphite HPG-53

  • Hot-work die Steel H13

    CNC

    Hot-work die Steel H13

  • View More
    • Material
      Polycarbonate(PC)
    • Process
      CNC
    • Advantage

      It has excellent electrical insulation, extensibility, dimensional stability and chemical resistance, high strength, heat resistance, and cold resistance; it has the advantages of self-extinguishing, flame retardant, non-toxic and colorable; easy to process, and large Mass production

    • Weakness

      It is not resistant to scratches

    • Material
      HDPE
    • Process
      CNC
    • Advantage

      Cost-effective.
      Can withstand temperatures from -148 to 176 degrees Fahrenheit.
      Non-leaching.
      UV-resistant.
      Dishwasher safe.
      Resistant to most chemical solvents.
      Stiff material.

    • Weakness

      Poor weathering resistance
      Flammable
      Sensitive to stress cracking
      Difficult to bond

    • Material
      PolyVinyl Chloride PVC
    • Process
      CNC
    • Advantage

      Polyvinyl Chloride is readily available and relatively inexpensive.
      Polyvinyl Chloride is very dense and thus very hard and resists impact deformation very well relative to other plastics.
      Polyvinyl Chloride has outstanding tensile strength.
      Polyvinyl Chloride is very resistant to chemicals and alkalis.

    • Weakness

      Polyvinyl Chloride has very poor heat stability. For this reason, additives that stabilize the material at higher temperatures are typically added to the material during production.
      Polyvinyl Chloride emits toxic fumes when melted or subject to a fire.

    • Material
      Copper
    • Process
      CNC
    • Advantage

      Ductility
      High flexibility
      Great heat resistance
      Good conductivity

    • Weakness

      Electromagnetic interference
      Intolerance to electrical surges

    • Material
      PTFE
    • Process
      CNC
    • Advantage

      PTFE is white and has the advantages of a very high temperature rating, extremely high lubricity, and being inert to most caustic fluids

    • Weakness

      A disadvantage is that it’s also very soft.

    • Material
      PEEK
    • Process
    • Advantage

      high temperature , Mechanical properties , Self-lubricating , resistance to chemicals (resistance to corrosion), Flame resistance , Peeling resistance

    • Weakness

      hydrophobic nature

    • Material
      Graphite HPG-53
    • Process
      CNC
    • Advantage

      high-temperature resistant material , good thermal conductivity, property is very stable, radiation resistance of graphite is excellent , rich in raw materials, cheap, easy to produce high-purity

    • Weakness

      Very low thermal neutron absorption cross-section ,

    • Material
      Hot-work die Steel H13
    • Process
      CNC
    • Advantage

      For high-quality tool steel, steel mills generally adopt the smelting processes such as furnace refining, vacuum treatment, vacuum smelting, powder spraying and electro slag re-melting to reduce the content of harmful elements such as oxygen, hydrogen and inclusions in steel.

    • Weakness

      Poor density and low purity;
      Severe annealing banding segregation and uneven annealing structure;
      After quenching and tempering, many liquid carbides remained unchanged; In the impact test, the place where the chain-like liquid carbide accumulates is easy to crack, and the fracture is characterized by horizontal streaks and low toughness.

  • Hei-Cast 8400 soft glue

    Hei-Cast 8400 soft glue

  • Hei-Cast 8263 ABS

    Hei-Cast 8263 ABS

  • UP 5690 vacuum injection polyurethane resin

    UP 5690 vacuum injection polyurethane resin

  • A356/AL356

    A356/AL356

  • UPX 5210 anti-yellow-transparent hardcore polyurethane resin

    UPX 5210 anti-yellow-transparent hardcore polyurethane resin

  • SS304

    SS304

  • SS316

    SS316

  • View More
    • Material
      Hei-Cast 8400 soft glue
    • Process
    • Advantage
    • Weakness
    • Material
      Hei-Cast 8263 ABS
    • Process
    • Advantage
    • Weakness
    • Material
      UP 5690 vacuum injection polyurethane resin
    • Process
    • Advantage
    • Weakness
    • Material
      A356/AL356
    • Process
    • Advantage
    • Weakness
    • Material
      UPX 5210 anti-yellow-transparent hardcore polyurethane resin
    • Process
    • Advantage
    • Weakness
    • Material
      SS304
    • Process
    • Advantage
    • Weakness
    • Material
      SS316
    • Process
    • Advantage
    • Weakness

    Why Choose Unionfab?

    • Affordable 3D Printing Manufacturer in China
    • Asia-Pacific’s Largest Industrial-Grade 3D Printing Manufacturer
    • Team Supported With Over 250 Professionals & Technicians
    • Various Materials and finishing
    • Lowest Price in European and American Markets
    • 99% On-Time Shipping With Great Support From DHL , FedEx ,etc…
    • Great Quality Approved By Customers All Over The World

    • 23100Customers served


    • 3M+Parts produced


    • 460Machines


    • 3+NFactories with ISO9001

    Learn More

    Unionfab High Quality Parts on Demand

    •  Buy Protection We will refund if the quality is with defects
    • Worldwild Delivery Covers more than 200 countries and regions worldwide
    • Safe Payment Pay with secure payment methods
    • Not A Broker Competitive pricing from manufacturer of diverse capabilities

    Unionfab What Our Customers Say

  • Siemens

    Siemens

    

    "Out of all companies, we chose Unionfab because their engineers and printing technology were capable of actually transforming our designs into reality."

  • Treatstock

    Treatstock

    

    "Unionfab is the largest Asia 3D Printing Hubs with 450 Machines. They have been making 3D printing since 2014. They work with different types of Resin, such as regular Resin, High Temp Resin, Tough Resin, Castable Resin, and also with different types of Nylon: HP PA-12 and PA-12 with Glass Beads in different colors. Our item was printed in Brown Resin, and we are very satisfied with the result. The item was done very well, bridges and holes are made of high quality. The piece was printed in a timely manner."

  • Schneider Electric

    Schneider Electric

    

    "We have established a long-term and friendly cooperative relationship with Unionfab in 2014. During the 6-year cooperation process, Unionfab has provided us with professional 3D printing technology solutions, whether it is an urgent order or an inner cavity. For products with complex structures, the Unionfab team delivers our products on time with high quality, which has provided a lot of help for the smooth development of our product, especially in R&D projects. What's more satisfying is that Unionfab's products are consistently perfect. "