UTR 3500
UTR 3500 is a low-viscosity stereolithography molding resin for SLA. It is a material that combines rigidity, impact resistance, temperature resistance, and drop resistance. It has passed three biocompatibility tests. Its use in making orthodontic hot-pressed model materials has been widely recognized by customers. It is a classic hot-pressed model orthodontic material.
Dimensional Stability
Surface Quality
Lightweight
Lead Time
4~6 days
Tolerance
± 0.2% (minimum of ± 0.2 mm)
Min. Order
1
Reference Unit Price Range
0.45 - 1.00
Advantages
- High dimensional accuracy
- Surface Quality
- Cost Efficient
Disadvantages
- Limited heat resistance
- Very limited performance
- Limited weather resistance
- Limited chemical resistance
- Limited wear resistance
- Limited toughness
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
Surface Quality
ممتازدرجة التقييم: 5/5
Lightweight
مرتفعدرجة التقييم: 4/5
Dimensional Stability
مرتفعدرجة التقييم: 4/5
Cost Efficient
متوسطدرجة التقييم: 3/5
Moisture Resistance
متوسطدرجة التقييم: 3/5
High Strength
متوسطدرجة التقييم: 3/5
Rigidity
متوسطدرجة التقييم: 3/5
Weather Resistance
منخفضدرجة التقييم: 2/5
Corrosion Resistance
منخفضدرجة التقييم: 2/5
Surface Finish Options
Surface Finish Options
Available finish options for UTR 3500.
As Printed
Color
White
Accuracy
± 0.2% (minimum of ± 0.2 mm)
Painting
Finish options
Glossy and matte paint finishes available
Best for
إضافة لون مخصص وطبقة طلاء واقية إلى قطع UTR ٣٥٠٠ من أجل نماذج المظهر والعرض.
Note
التحقق من التصاق الطلاء وحدات القناع وتغطية الطبقة على UTR ٣٥٠٠ قبل الإنتاج، خاصة حول الواجهات والحواف والتفاصيل الدقيقة.
Silk Screening
Print method
Single- or multi-color graphics on flat or gently curved surfaces
Best for
تطبيق الشعارات والملصقات أو الرسومات الوظيفية على المسطحات من قطع UTR ٣٥٠٠ المستخدمة من أجل نماذج المظهر والعرض.
Note
تأكيد المساحة القابلة للطباعة والتصاق الحبر وتسجيل الرسومات على UTR ٣٥٠٠ قبل الإنتاج.
Vacuum Plating
Finish options
Glossy and matte plated finishes available
Best for
إنشاء تشطيب معدني عاكس على قطع UTR ٣٥٠٠ من أجل نماذج المظهر والعرض والتصنيعات التي تركز على المظهر.
Note
تأكيد تغطية مجال الرؤية والقناع والتصاق الطلاء المعدني على UTR ٣٥٠٠ قبل الإنتاج.
Polishing
Surface result
Smoother, glossier visible surfaces where geometry allows
Best for
تحسين النعومة واللمعان على قطع UTR ٣٥٠٠ المستخدمة من أجل نماذج المظهر والعرض، حيثما تسمح الهندسة بذلك.
Note
تأكيد الحفاظ على الحواف والتأثير البعدي على UTR ٣٥٠٠؛ قد تختلط التفاصيل الدقيقة أثناء التلميع.
Industries & Applications
Where UTR 3500 Delivers
Education
- Appearance and display models
- Classroom demonstration models
- Hands-on design projects
Research & Development
- Assembly testing
- Functional prototype testing
- Experimental prototype components
Medical & Dental
- Educational and training models
- Fit-check and workflow prototypes
- Non-implantable demonstration components
- Custom low-volume development parts
Consumer Electronics
- Product enclosure prototypes
- Fit-check and assembly models
- Custom test fixtures
- Low-volume concept validation builds
Technical Specifications
Design Guidelines
Material Properties
Process & Dimensional Specs
Ready to Order?
Upload your 3D file and receive a quote for UTR 3500 parts. Typical turnaround is 4~6 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
تحدث مع مهندس عمليات
هل لديك متطلبات تفاوتات ضيقة أو أشكال هندسية معقدة؟ يُراجع مهندسونا رسوماتك قبل تقديم العرض للإشارة إلى المشكلات المحتملة.
Compare & Decide
Related & Alternative Materials
SLA · Resins
Somos Ledo Resin
SLA · White
Somos Ledo Resin is a tough, high-performance material ideal for prototyping and functional testing. This material integrates easily into production cycles for design testing, ensuring parts meet functional requirements before full-scale production, thereby saving time, money, and materials during product development. With its excellent performance, Somos Ledo Resin is widely used in automotive, aerospace, and small-batch durable parts manufacturing.
SLA · Resins
UTR 3100NE
SLA · White
UTR 3100NE is a cost-effective light-curing resin suitable for SLA equipment. It is easy to use, fast to build, and has good printing stability. The printed samples have a good balance in color, strength, toughness, temperature resistance, warpage, deformation, etc., and are suitable for the production of industrial prototypes, home appliances, automobiles, film and television props, display models, etc., and are an excellent choice for printing prototype samples.
SLA · Resins
Standard Resin (White)
SLA · White
Standard Resin (white) has excellent surface details and pure white texture. It is one of the most commonly used resin materials and has excellent dimensional accuracy. This material is suitable for pipe parts, fasteners, electronic product casings, automobile casings and instrument panel components, etc. that require high toughness and heat resistance. Prints come offline and are ready to use, with a matte finish, opaque appearance and precise detail.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICP备17023219号-3Region: -, Version: 26.09.18
