SS17-4PH
The strength and hardness of 17-4PH precipitation hardened stainless steel can be significantly improved through heat treatment after sintering. The color of its printed parts is dark gray to black gray in the sintered state. It has good mechanical properties and moderate corrosion resistance, and is suitable for structural parts that require both strength and precision.
Dimensional Stability
High Strength
Wear Resistance
Toughness
Rigidity
Lead Time
6~10 days
Tolerance
± 0.3% (minimum of ± 0.3mm)
Min. Order
1
Reference Unit Price Range
0.27 - 0.60
Advantages
- Heat-treatment capable
- High Strength
Disadvantages
- Higher weight
- Lower surface quality
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
Heat Resistance
AusgezeichnetReferenzbewertung: 5/5
Dimensional Stability
AusgezeichnetReferenzbewertung: 5/5
High Strength
AusgezeichnetReferenzbewertung: 5/5
Rigidity
AusgezeichnetReferenzbewertung: 5/5
Weather Resistance
HochReferenzbewertung: 4/5
Corrosion Resistance
HochReferenzbewertung: 4/5
Wear Resistance
HochReferenzbewertung: 4/5
Toughness
HochReferenzbewertung: 4/5
Cost Efficient
MittelReferenzbewertung: 3/5
Surface Finish Options
Surface Finish Options
Available finish options for SS17-4PH.
As Printed
Color
Gray-Black
Surface
Ra 6-12 μm (as printed)
Accuracy
± 0.3% (minimum of ± 0.3mm)
Polishing
Surface result
Smoother, glossier visible surfaces where geometry allows
Best for
Verbesserung der Glätte und des Glanzes von SS17-4PH-Teilen, die für Endverwendungsmetallteile verwendet werden, sofern die Geometrie dies zulässt.
Note
Bestätigen Sie die Kantenhaltung und die dimensionsbezogenen Auswirkungen auf SS17-4PH; feine Merkmale können während des Polierens abnehmen.
Sand Blasting
Surface result
Uniform matte texture
Best for
Erzeugen einer gleichmäßigen matten Textur auf SS17-4PH-Teilen, die für Endverwendungsmetallteile und Präsentations- oder Funktionsprototypen verwendet werden.
Note
Bestätigen Sie die Maskierung und die Merkmalsretention bei SS17-4PH; Strahlverfahren können die Textur verändern und feine Details abschwächen.
Laser Engraving
Marking result
Permanent text, logo, or identification marking
Best for
Hinzufügen von dauerhaften Texten, Logos oder Identifikationsmarkierungen zu SS17-4PH-Teilen, die für Endverwendungsmetallteile verwendet werden.
Note
Bestätigen Sie Kontrast, Markierungstiefe und Temperaturempfindlichkeit bei SS17-4PH vor der Produktion.
Shot Peening
Surface effect
Compressive surface treatment for metal parts
Best for
Verbesserung des Oberflächenzustands von SS17-4PH-Metallteilen, die für Endverwendungsmetallteile und tragende Anwendungen verwendet werden.
Note
Bestätigen Sie die Legierungsreaktion, die Maßtoleranz und die Oberflächenbedeckung bei SS17-4PH; Prozessparameter beeinflussen den endgültigen Oberflächenzustand.
Heat Treatment
Mechanical result
Adjusted strength, hardness, or stress-relief depending on the alloy
Best for
Anpassung der Festigkeit, Härte oder des Spannungszustands von SS17-4PH-Teilen für Endverwendungsmetallteile und anspruchsvolle funktionelle Anwendungen.
Note
Bestätigen Sie den legierungsspezifischen Zyklus, die Dimensionsänderung und die Nachbehandlungsanforderungen für SS17-4PH vor der Produktion.
Industries & Applications
Where SS17-4PH Delivers
Industrial Manufacturing
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Mounting brackets
- Deformation-resistant functional parts
Equipment
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Energy equipment parts
- Mounting brackets
Automotive
- Prototype and fit-check components
- Interior and non-safety-critical parts
- Custom fixtures and production aids
- Low-volume validation builds
Aerospace
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Aerospace structural parts
Jewelry
- Design concept models
- Pattern and master-model development
- Display and presentation pieces
- Low-volume custom accessories
Fine Jewelry & Accessories
- Fine accessory concept models
- Pattern and master-model development
- Display and presentation pieces
- Low-volume custom accessories
Robotics
- Prototype end-effectors and brackets
- Custom assembly and test fixtures
- Low-volume functional validation builds
- Integration and fit-check components
Industrial Automation
- End-use metal parts
- Functional prototype testing
- Assembly testing
Technical Specifications
Design Guidelines
Material Properties
Process & Dimensional Specs
Ready to Order?
Upload your 3D file and receive a quote for SS17-4PH parts. Typical turnaround is 6~10 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
Sprechen Sie mit einem Verfahrenstechniker
Haben Sie Anforderungen mit engen Toleranzen oder komplexer Geometrie? Unsere Ingenieure prüfen Ihre Zeichnung vor der Angebotserstellung, um potenzielle Probleme frühzeitig zu erkennen.
Compare & Decide
Related & Alternative Materials
MBJ · Metals
SS316L
MBJ · Gray-Black
In the MBJ process, 316L stainless steel usually appears silver gray to dark gray after sintering due to its excellent corrosion resistance and toughness, making it an ideal choice for preparing fluid parts with complex structures.
SLM · Metals
17-4PH Stainless Steel
SLM · Silvery-gray
17-4 PH stainless steel is a martensitic precipitation hardening stainless steel. The material is known for its excellent corrosion resistance and extremely high strength and hardness, especially after heat treatment. 17-4 PH can be adjusted to different hardness and toughness levels through heat treatment, allowing users to tailor the properties of the alloy after sintering to suit a wide range of application scenarios, including: mechanical equipment, chemical processing, food processing, pump components, valves, fasteners, jigs and fixtures.
SLM · Metals
316L Stainless Steel
SLM · Silvery-gray
316L stainless steel is one of the most commonly used stainless steel grades in 3D printing. Thanks to the extremely high temperature gradient and extremely fast solidification rate during the printing process, the material's mechanical properties after molding are better than traditional castings (although some printers also support printing in 17-4 PH stainless steel). 316L is a metal with strong mechanical properties. The printed surface is usually rough and has pitting (melt pool marks). The material can provide a variety of polished or matte post-processing effects and is widely used in jewelry, functional parts, small sculptures and other fields.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICP备17023219号-3Region: -, Version: 26.09.0202
