Somos PerFORM
Unionfab PerFORM can mold composite parts with high strength, high stiffness and excellent high temperature resistance on standard 355 nm stereolithography (SLA) equipment. The material has a low viscosity, which helps improve printing processing efficiency. Its sidewall quality is excellent, and its detail resolution is better than other similar composite light-curing materials.
Dimensional Stability
High Strength
Rigidity
Surface Quality
Lead Time
5~7 days
Tolerance
± 0.2% (minimum of ± 0.2mm)
Min. Order
1
Reference Unit Price Range
0.54 - 1.20
Advantages
- High Strength
- Dimensional Stability
- Rigidity
Disadvantages
- Higher cost
- Limited weather resistance
- Limited chemical resistance
- Limited wear resistance
- Limited toughness
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
Surface Quality
ExcellentScore de référence : 5/5
High Strength
ExcellentScore de référence : 5/5
Rigidity
ExcellentScore de référence : 5/5
Dimensional Stability
ÉlevéScore de référence : 4/5
Heat Resistance
MoyenScore de référence : 3/5
Moisture Resistance
MoyenScore de référence : 3/5
Cost Efficient
FaibleScore de référence : 2/5
Weather Resistance
FaibleScore de référence : 2/5
Corrosion Resistance
FaibleScore de référence : 2/5
Surface Finish Options
Surface Finish Options
Available finish options for Somos PerFORM.
As Printed
Color
Off-White
Surface
Ra 2-5 μm (as printed)
Accuracy
± 0.2% (minimum of ± 0.2mm)
Painting
Finish options
Glossy and matte paint finishes available
Best for
Ajouter une couleur personnalisée et une couche de peinture protectrice aux pièces en Somos PerFORM pour tests de prototypes fonctionnels.
Note
Valider l'adhésion de la peinture, les limites de masquage et la couverture du revêtement sur Somos PerFORM avant production, en particulier au niveau des interfaces, des bords et des détails fins.
Silk Screening
Print method
Single- or multi-color graphics on flat or gently curved surfaces
Best for
Application de logos, d'étiquettes ou de graphiques fonctionnels sur des zones planes des pièces en Somos PerFORM utilisées pour tests de prototypes fonctionnels.
Note
Confirmer la zone imprimable, l'adhésion de l'encre et le repérage graphique sur Somos PerFORM avant production.
Vacuum Plating
Finish options
Glossy and matte plated finishes available
Best for
Créer une finition métallique réfléchissante sur les pièces en Somos PerFORM pour tests de prototypes fonctionnels et fabrications axées sur l'apparence.
Note
Confirmer la couverture en champ de vision, le masquage et l'adhésion du placage sur Somos PerFORM avant production.
Polishing
Surface result
Smoother, glossier visible surfaces where geometry allows
Best for
Améliorer la douceur et le brillant sur les pièces en Somos PerFORM utilisées pour tests de prototypes fonctionnels, lorsque la géométrie le permet.
Note
Confirmer la rétention des bords et l'impact dimensionnel sur Somos PerFORM ; les détails fins peuvent s'atténuer pendant le polissage.
Industries & Applications
Where Somos PerFORM Delivers
Medical & Dental
- Educational and training models
- Fit-check and workflow prototypes
- Non-implantable demonstration components
- Custom low-volume development parts
Education
- Appearance and display models
- Classroom demonstration models
- Hands-on design projects
Research & Development
- Functional prototype testing
- Assembly testing
- Experimental prototype components
Consumer Electronics
- Product enclosure prototypes
- Fit-check and assembly models
- Custom test fixtures
- Low-volume concept validation builds
Technical Specifications
Design Guidelines
Material Properties
Process & Dimensional Specs
Ready to Order?
Upload your 3D file and receive a quote for Somos PerFORM parts. Typical turnaround is 5~7 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
Parler à un Ingénieur Procédé
Vous avez des exigences de tolérances serrées ou une géométrie complexe ? Nos ingénieurs étudient votre plan avant l'établissement du devis pour signaler les points d'attention.
Compare & Decide
Related & Alternative Materials
SLA · Resins
High-temp-220D Resin
SLA · Beige
High-temp-220D resin is a specialty resin designed for SLA 3D printing. The material has excellent heat resistance, and after simple post-processing, its heat distortion temperature (HDT) can reach up to 227°C. At the same time, the resin also has excellent dimensional accuracy and reliable surface quality, making it an ideal choice for high-temperature and demanding applications such as wind tunnel testing, impellers, motor components, and rapid mold manufacturing.
SLA · Resins
High-temp-150D Resin
SLA · Transparent Red
High-temp-150D resin is a red, transparent, low-viscosity liquid stereolithography (SLA) resin. Its molded parts have excellent high-temperature resistance and can be used at temperatures up to 150°C under no-load conditions. Its toughness is slightly worse than other industrial prototyping materials, and it is not suitable for printing thin-walled parts of 0.3 mm and below. It is suitable for printing temperature-resistant samples such as rapid molds and electroplating. The material is particularly suitable for making high-resolution, strong models and is widely used in industries that have strict requirements on temperature resistance, such as high-temperature baking paint, electroplating processes and rapid mold manufacturing.
SLA · Resins
Rigid Resin
SLA · White&Black
Rigid Resin (white) has the characteristics of high hardness, smooth surface, strong detail expression, dimensional stability, strong chemical resistance and high precision. Its molded products can be used in high-humidity environments.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICP备17023219号-3Region: -, Version: 26.09.0202
