Somos PerFORM
Unionfab PerFORM can mold composite parts with high strength, high stiffness and excellent high temperature resistance on standard 355 nm stereolithography (SLA) equipment. The material has a low viscosity, which helps improve printing processing efficiency. Its sidewall quality is excellent, and its detail resolution is better than other similar composite light-curing materials.
Dimensional Stability
High Strength
Rigidity
Surface Quality
Lead Time
5~7 days
Tolerance
± 0.2% (minimum of ± 0.2mm)
Min. Order
1
Reference Unit Price Range
0.54 - 1.20
Advantages
- High Strength
- Dimensional Stability
- Rigidity
Disadvantages
- Higher cost
- Limited weather resistance
- Limited chemical resistance
- Limited wear resistance
- Limited toughness
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
Surface Quality
优秀来源评分：5/5
High Strength
优秀来源评分：5/5
Rigidity
优秀来源评分：5/5
Dimensional Stability
高来源评分：4/5
Heat Resistance
中来源评分：3/5
Moisture Resistance
中来源评分：3/5
Cost Efficient
低来源评分：2/5
Weather Resistance
低来源评分：2/5
Corrosion Resistance
低来源评分：2/5
Surface Finish Options
Surface Finish Options
Available finish options for Somos PerFORM.
As Printed
Color
Off-White
Surface
Ra 2-5 μm (as printed)
Accuracy
± 0.2% (minimum of ± 0.2mm)
Painting
Finish options
Glossy and matte paint finishes available
Best for
为Somos PerFORM 树脂零件添加定制颜色和保护漆层，适用于功能原型测试。
Note
生产前请验证Somos PerFORM 树脂上的油漆附着力、遮蔽边界和涂层覆盖度，特别是在界面、边缘和精细细节周围。
Silk Screening
Print method
Single- or multi-color graphics on flat or gently curved surfaces
Best for
在Somos PerFORM 树脂零件的平面或平缓曲面上印刷标识、标签或功能性图形，适用于功能原型测试。
Note
生产前请确认Somos PerFORM 树脂上的可打印区域、油墨附着力和图案套准精度。
Vacuum Plating
Finish options
Glossy and matte plated finishes available
Best for
在Somos PerFORM 树脂零件上形成具有金属光泽的反光表面，适用于功能原型测试以及以外观为主的制作。
Note
生产前请确认Somos PerFORM 树脂上的可视区域覆盖、遮蔽和电镀附着力。
Polishing
Surface result
Smoother, glossier visible surfaces where geometry allows
Best for
在Somos PerFORM 树脂零件上提升平滑度和光泽度，适用于功能原型测试，在几何形状允许的情况下。
Note
请确认Somos PerFORM 树脂的边缘保持性和尺寸影响；抛光过程中精细特征可能会变钝。
Industries & Applications
Where Somos PerFORM Delivers
Medical & Dental
- Educational and training models
- Fit-check and workflow prototypes
- Non-implantable demonstration components
- Custom low-volume development parts
Education
- Appearance and display models
- Classroom demonstration models
- Hands-on design projects
Research & Development
- Functional prototype testing
- Assembly testing
- Experimental prototype components
Consumer Electronics
- Product enclosure prototypes
- Fit-check and assembly models
- Custom test fixtures
- Low-volume concept validation builds
Technical Specifications
Design Guidelines
Material Properties
Process & Dimensional Specs
Ready to Order?
Upload your 3D file and receive a quote for Somos PerFORM parts. Typical turnaround is 5~7 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
Compare & Decide
Related & Alternative Materials
SLA · Resins
High-temp-220D Resin
SLA · Beige
High-temp-220D resin is a specialty resin designed for SLA 3D printing. The material has excellent heat resistance, and after simple post-processing, its heat distortion temperature (HDT) can reach up to 227°C. At the same time, the resin also has excellent dimensional accuracy and reliable surface quality, making it an ideal choice for high-temperature and demanding applications such as wind tunnel testing, impellers, motor components, and rapid mold manufacturing.
SLA · Resins
High-temp-150D Resin
SLA · Transparent Red
High-temp-150D resin is a red, transparent, low-viscosity liquid stereolithography (SLA) resin. Its molded parts have excellent high-temperature resistance and can be used at temperatures up to 150°C under no-load conditions. Its toughness is slightly worse than other industrial prototyping materials, and it is not suitable for printing thin-walled parts of 0.3 mm and below. It is suitable for printing temperature-resistant samples such as rapid molds and electroplating. The material is particularly suitable for making high-resolution, strong models and is widely used in industries that have strict requirements on temperature resistance, such as high-temperature baking paint, electroplating processes and rapid mold manufacturing.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICP备17023219号-3Region: -, Version: 26.09.0904
