Temp R150
Temp R150 is a white light-curing molding resin specially designed for SLA 3D printing. Samples made with it not only have high temperature resistance (after curing, the heat deformation temperature reaches more than 130°C); they also have high toughness, high precision and reliable surface quality. It is not only suitable for printing samples with higher temperature resistance requirements, but is also particularly suitable for printing thin-walled parts.
Dimensional Stability
High Strength
Rigidity
Heat Resistance
Surface Quality
Lead Time
3~5 days
Tolerance
± 0.2% (minimum of ± 0.2mm)
Min. Order
1
Reference Unit Price Range
0.45 - 1.00
Advantages
- Fine detail reproduction
- Heat resistance
Disadvantages
- Limited weather resistance
- Limited chemical resistance
- Limited wear resistance
- Limited toughness
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
Surface Quality
ممتازدرجة التقييم: 5/5
Heat Resistance
مرتفعدرجة التقييم: 4/5
Lightweight
مرتفعدرجة التقييم: 4/5
Dimensional Stability
مرتفعدرجة التقييم: 4/5
High Strength
مرتفعدرجة التقييم: 4/5
Rigidity
مرتفعدرجة التقييم: 4/5
Cost Efficient
متوسطدرجة التقييم: 3/5
Moisture Resistance
متوسطدرجة التقييم: 3/5
Weather Resistance
منخفضدرجة التقييم: 2/5
Surface Finish Options
Surface Finish Options
Available finish options for Temp R150.
As Printed
Color
White
Accuracy
± 0.2% (minimum of ± 0.2mm)
Painting
Finish options
Glossy and matte paint finishes available
Best for
إضافة لون مخصص وطبقة طلاء واقية إلى قطع Temp R150 من أجل التحقق من النماذج الأولية الوظيفية عالية الحرارة.
Note
التحقق من التصاق الطلاء وحدات القناع وتغطية الطبقة على Temp R150 قبل الإنتاج، خاصة حول الواجهات والحواف والتفاصيل الدقيقة.
Silk Screening
Print method
Single- or multi-color graphics on flat or gently curved surfaces
Best for
تطبيق الشعارات والملصقات أو الرسومات الوظيفية على المسطحات من قطع Temp R150 المستخدمة من أجل التحقق من النماذج الأولية الوظيفية عالية الحرارة.
Note
تأكيد المساحة القابلة للطباعة والتصاق الحبر وتسجيل الرسومات على Temp R150 قبل الإنتاج.
Vacuum Plating
Finish options
Glossy and matte plated finishes available
Best for
إنشاء تشطيب معدني عاكس على قطع Temp R150 من أجل التحقق من النماذج الأولية الوظيفية عالية الحرارة والتصنيعات التي تركز على المظهر.
Note
تأكيد تغطية مجال الرؤية والقناع والتصاق الطلاء المعدني على Temp R150 قبل الإنتاج.
Polishing
Surface result
Smoother, glossier visible surfaces where geometry allows
Best for
تحسين النعومة واللمعان على قطع Temp R150 المستخدمة من أجل التحقق من النماذج الأولية الوظيفية عالية الحرارة، حيثما تسمح الهندسة بذلك.
Note
تأكيد الحفاظ على الحواف والتأثير البعدي على Temp R150؛ قد تختلط التفاصيل الدقيقة أثناء التلميع.
Industries & Applications
Where Temp R150 Delivers
Education
- Classroom demonstration models
- Hands-on design projects
- Prototype and experiment components
- Student project display models
Research & Development
- High-temperature functional prototype validation
- Functional prototype testing
- Assembly testing
Equipment
- Prototype equipment components
- Custom jigs and fixtures
- Low-volume functional validation builds
- Production support and maintenance aids
Industrial Manufacturing
- Prototype and fit-check components
- Custom jigs and fixtures
- Low-volume functional validation builds
- Production support and maintenance aids
Technical Specifications
Design Guidelines
Material Properties
Process & Dimensional Specs
Ready to Order?
Upload your 3D file and receive a quote for Temp R150 parts. Typical turnaround is 3~5 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
تحدث مع مهندس عمليات
هل لديك متطلبات تفاوتات ضيقة أو أشكال هندسية معقدة؟ يُراجع مهندسونا رسوماتك قبل تقديم العرض للإشارة إلى المشكلات المحتملة.
Compare & Decide
Related & Alternative Materials
SLA · Resins
High-temp-150D Resin
SLA · Transparent Red
High-temp-150D resin is a red, transparent, low-viscosity liquid stereolithography (SLA) resin. Its molded parts have excellent high-temperature resistance and can be used at temperatures up to 150°C under no-load conditions. Its toughness is slightly worse than other industrial prototyping materials, and it is not suitable for printing thin-walled parts of 0.3 mm and below. It is suitable for printing temperature-resistant samples such as rapid molds and electroplating. The material is particularly suitable for making high-resolution, strong models and is widely used in industries that have strict requirements on temperature resistance, such as high-temperature baking paint, electroplating processes and rapid mold manufacturing.
SLA · Resins
High-temp-220D Resin
SLA · Beige
High-temp-220D resin is a specialty resin designed for SLA 3D printing. The material has excellent heat resistance, and after simple post-processing, its heat distortion temperature (HDT) can reach up to 227°C. At the same time, the resin also has excellent dimensional accuracy and reliable surface quality, making it an ideal choice for high-temperature and demanding applications such as wind tunnel testing, impellers, motor components, and rapid mold manufacturing.
SLA · Resins
Somos PerFORM
SLA · Off-White
Unionfab PerFORM can mold composite parts with high strength, high stiffness and excellent high temperature resistance on standard 355 nm stereolithography (SLA) equipment. The material has a low viscosity, which helps improve printing processing efficiency. Its sidewall quality is excellent, and its detail resolution is better than other similar composite light-curing materials.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICP备17023219号-3Region: -, Version: 26.09.08
