Aluminum (6061)
Aluminum alloy 6061 is an extremely versatile alloy known for its good balance of strength, corrosion resistance and formability. Due to its relatively low density and ease of machining, the material is widely used in industries such as aerospace, construction and automotive manufacturing. This makes 6061 one of the most commonly used aluminum alloys in the world, especially suitable for applications that have strict requirements on strength-to-weight ratio (strength-to-weight ratio). In addition, the alloy has excellent thermal and electrical conductivity properties, further enhancing its engineering design value for optimizing system efficiency without sacrificing performance.
Dimensional Stability
Toughness
Heat Resistance
Weather Resistance
Lightweight
Lead Time
6~10 days
Tolerance
± 0.2% (minimum of ± 0.2mm)
Min. Order
1
Reference Unit Price Range
0.63 - 1.40
Advantages
- Mature post-processing compatibility
- Widely used general-purpose alloy
- Heat-treatment capable
Disadvantages
- Higher cost
- Limited strength for demanding loads
- Lower surface quality
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
Lightweight
ExcellentScore de référence : 5/5
Heat Resistance
ÉlevéScore de référence : 4/5
Weather Resistance
ÉlevéScore de référence : 4/5
Thermal Conductivity
ÉlevéScore de référence : 4/5
Dimensional Stability
ÉlevéScore de référence : 4/5
Toughness
ÉlevéScore de référence : 4/5
Corrosion Resistance
MoyenScore de référence : 3/5
ESD Safe
MoyenScore de référence : 3/5
Wear Resistance
MoyenScore de référence : 3/5
Surface Finish Options
Surface Finish Options
Available finish options for Aluminum (6061).
As Printed
Color
Silvery-gray
Surface
Ra 12-25 μm (as-built SLM)
Accuracy
± 0.2% (minimum of ± 0.2mm)
Polishing
Surface result
Smoother, glossier visible surfaces where geometry allows
Best for
Améliorer la douceur et le brillant des pièces en Aluminum (6061) utilisées pour des pièces métalliques finales, lorsque la géométrie le permet.
Note
Confirmer la rétention des bords et l'impact dimensionnel sur Aluminum (6061) ; les caractéristiques fines peuvent s'atténuer pendant le polissage.
Sand Blasting
Surface result
Uniform matte texture
Best for
Créer une texture mate uniforme sur les pièces en Aluminum (6061) utilisées pour des pièces métalliques finales et des prototypes d'affichage ou fonctionnels.
Note
Confirmer le masquage et la rétention des caractéristiques sur Aluminum (6061) ; le sabrage abrasif peut modifier la texture et atténuer les détails fins.
Laser Engraving
Marking result
Permanent text, logo, or identification marking
Best for
Ajouter du texte, des logos ou une identification permanents aux pièces en Aluminum (6061) utilisées pour des pièces métalliques finales.
Note
Confirmer le contraste, la profondeur de marquage et la sensibilité thermique sur Aluminum (6061) avant la production.
Anodizing
Surface result
Protective anodized surface finish for aluminum parts
Best for
Appliquer un traitement d'anodisation aux pièces en Aluminum (6061) utilisées pour des pièces métalliques finales.
Note
Confirmer la compatibilité des matériaux, la géométrie et les critères d'acceptation pour Aluminum (6061) avant d'appliquer l'anodisation.
Shot Peening
Surface effect
Compressive surface treatment for metal parts
Best for
Améliorer l'état de surface des pièces métalliques en Aluminum (6061) utilisées pour des pièces métalliques finales et des applications portantes.
Note
Confirmer la réponse de l'alliage, la tolérance dimensionnelle et la couverture de surface sur Aluminum (6061) ; les paramètres du procédé affectent l'état de surface final.
Heat Treatment
Mechanical result
Adjusted strength, hardness, or stress-relief depending on the alloy
Best for
Ajuster la résistance, la dureté ou l'état de contrainte des pièces en Aluminum (6061) pour des pièces métalliques finales et des usages fonctionnels exigeants.
Note
Confirmer le cycle spécifique à l'alliage, le changement dimensionnel et les exigences post-traitement pour Aluminum (6061) avant la production.
Industries & Applications
Where Aluminum (6061) Delivers
Industrial Manufacturing
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Mounting brackets
Equipment
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Mounting brackets
- Electronic device housings
Automotive
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Automotive functional parts
Aerospace
- Prototype and fit-check components
- Non-flight tooling and production aids
- Cabin and ground-support prototypes
- Low-volume engineering validation builds
Consumer Electronics
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Electronic device housings
Entertainment & Collectibles
- Display and concept models
- Collectible and figurine prototypes
- Prop and costume-fit components
- Low-volume creative production parts
Jewelry
- Design concept models
- Pattern and master-model development
- Display and presentation pieces
- Low-volume custom accessories
Fine Jewelry & Accessories
- Fine accessory concept models
- Pattern and master-model development
- Display and presentation pieces
- Low-volume custom accessories
Robotics
- Prototype end-effectors and brackets
- Custom assembly and test fixtures
- Low-volume functional validation builds
- Integration and fit-check components
Industrial Automation
- End-use metal parts
- Functional prototype testing
- Assembly testing
Technical Specifications
Design Guidelines
Material Properties
Process & Dimensional Specs
Ready to Order?
Upload your 3D file and receive a quote for Aluminum (6061) parts. Typical turnaround is 6~10 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
Parler à un Ingénieur Procédé
Vous avez des exigences de tolérances serrées ou une géométrie complexe ? Nos ingénieurs étudient votre plan avant l'établissement du devis pour signaler les points d'attention.
Compare & Decide
Related & Alternative Materials
SLM · Metals
Aluminum (AlSi10Mg)
SLM · Silvery-gray
AlSi10Mg is a relatively soft but versatile aluminum alloy material. Thanks to its relatively low cost, excellent machinability and formability, this material is widely used in many industrial fields and is currently one of the most commonly used metals. The construction industry is the main application area for this material, followed by general engineering. AlSi10Mg exhibits excellent thermal and electrical conductivity. Its thermal conductivity is about one-half that of copper, and its electrical conductivity is about two-thirds that of copper.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICP备17023219号-3Region: -, Version: 26.09.0202
