Inconel 718
A Ni-Cr-Fe-based precipitation hardening type deformed high-temperature alloy, the long-term use temperature range is -253°C~650°C, and the short-term use temperature can reach 800°C. The alloy has high strength below 650°C and has good fatigue resistance, radiation resistance, oxidation resistance and corrosion resistance, as well as good processing performance, welding performance and long-term structural stability. It is widely used in aviation, aerospace, petrochemical and other fields.
Dimensional Stability
High Strength
Wear Resistance
Rigidity
Heat Resistance
Lead Time
6~10 days
Tolerance
± 0.2% (minimum of ± 0.2mm)
Min. Order
1
Reference Unit Price Range
/
Advantages
- Heat resistance
- Improved creep resistance
- Heat-treatment capable
- High Strength
Disadvantages
- Higher cost
- Higher weight
- Lower surface quality
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual â not absolute stress ratings.
Heat Resistance
åªç§è©äŸ¡ã¹ã³ã¢ïŒ5/5
Corrosion Resistance
åªç§è©äŸ¡ã¹ã³ã¢ïŒ5/5
Dimensional Stability
åªç§è©äŸ¡ã¹ã³ã¢ïŒ5/5
High Strength
åªç§è©äŸ¡ã¹ã³ã¢ïŒ5/5
Rigidity
åªç§è©äŸ¡ã¹ã³ã¢ïŒ5/5
Weather Resistance
é«ãè©äŸ¡ã¹ã³ã¢ïŒ4/5
Wear Resistance
é«ãè©äŸ¡ã¹ã³ã¢ïŒ4/5
Thermal Conductivity
äžè©äŸ¡ã¹ã³ã¢ïŒ3/5
ESD Safe
äžè©äŸ¡ã¹ã³ã¢ïŒ3/5
Surface Finish Options
Surface Finish Options
Available finish options for Inconel 718.
As Printed
Color
Silvery-gray
Accuracy
± 0.2% (minimum of ± 0.2mm)
Polishing
Surface result
Smoother, glossier visible surfaces where geometry allows
Best for
圢ç¶ãèš±ãå Žåã«ãæçµçšééå±éšåã«äœ¿çšãããInconel 718éšåã®å¹³æ»æ§ãšå æ²¢ãåäžãããŸãã
Note
Inconel 718ã®ãšããžä¿ææ§ãšå¯žæ³ãžã®åœ±é¿ã確èªããŠãã ãããç 磚äžã«åŸ®çŽ°ãªç¹åŸŽãè»åããå¯èœæ§ããããŸãã
Sand Blasting
Surface result
Uniform matte texture
Best for
æçµçšééå±éšåããã³ãã£ã¹ãã¬ã€ãŸãã¯æ©èœãããã¿ã€ãã«äœ¿çšãããInconel 718éšåã«åäžãªããããã¯ã¹ãã£ãäœæããŸãã
Note
Inconel 718ã®ãã¹ãã³ã°ãšç¹åŸŽä¿æã確èªããŠãã ããããã©ã¹ãåŠçã«ãããã¯ã¹ãã£ãå€åãã埮现ãªãã£ããŒã«ãè»åããå¯èœæ§ããããŸãã
Laser Engraving
Marking result
Permanent text, logo, or identification marking
Best for
æçµçšééå±éšåã«äœ¿çšãããInconel 718éšåã«ãæ°žç¶çãªããã¹ããããŽããŸãã¯èå¥ããŒãã³ã°ãè¿œå ããŸãã
Note
çç£åã«Inconel 718ã®ã³ã³ãã©ã¹ããããŒãã³ã°æ·±åºŠãç±æåæ§ã確èªããŠãã ããã
Shot Peening
Surface effect
Compressive surface treatment for metal parts
Best for
æçµçšééå±éšåããã³èåçšéã«äœ¿çšãããInconel 718éå±éšåã®è¡šé¢ç¶æ ãæ¹åããŸãã
Note
Inconel 718ã®åéå¿çã寞æ³å ¬å·®ãè¡šé¢è¢«èŠçã確èªããŠãã ãããããã»ã¹èšå®ãæçµçãªè¡šé¢ç¶æ ã«åœ±é¿ããŸãã
Heat Treatment
Mechanical result
Adjusted strength, hardness, or stress-relief depending on the alloy
Best for
æçµçšééå±éšåããã³èŠæ±ã®å³ããæ©èœçšéåãã®Inconel 718éšåã®åŒ·åºŠã硬床ããŸãã¯å¿åç¶æ ã調æŽããŸãã
Note
çç£åã«Inconel 718ã®åéåºæã®ãµã€ã¯ã«ã寞æ³å€åãããã³åŸåŠçèŠä»¶ã確èªããŠãã ããã
Industries & Applications
Where Inconel 718 Delivers
Industrial Manufacturing
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Deformation-resistant functional parts
Equipment
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Energy equipment parts
Aerospace
- End-use metal parts
- Functional prototype testing
- Assembly testing
- High-temperature aero-engine parts
Automotive
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Automotive engine-bay parts
Defense
- Prototype and fit-check components
- Custom fixtures and production aids
- Low-volume engineering validation builds
- Non-mission-critical demonstration parts
Technical Specifications
Design Guidelines
Material Properties
Process & Dimensional Specs
Ready to Order?
Upload your 3D file and receive a quote for Inconel 718 parts. Typical turnaround is 6~10 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
ããã»ã¹ãšã³ãžãã¢ã«çžè«
å³ããå ¬å·®ãè€éãªåœ¢ç¶ã®èŠä»¶ã¯ãããŸãããïŒèŠç©ããåã«åœç€Ÿãšã³ãžãã¢ãå³é¢ã確èªããæœåšçãªåé¡ç¹ãææããŸãã
Compare & Decide
Related & Alternative Materials
SLM · Metals
Inconel 625
SLM · Silvery-gray
Inconel 625 is a high-strength, high-temperature and corrosion-resistant nickel-based superalloy, mainly composed of nickel, chromium, molybdenum and niobium. This alloy has excellent oxidation resistance, stress corrosion cracking resistance and excellent high temperature performance. It is widely used in aerospace, nuclear industry, marine engineering and chemical equipment and other fields. It is especially suitable for harsh corrosive environments and high temperature load-bearing conditions.
SLM · Metals
Maraging Steel
SLM · Silvery-gray
Maraging Steel is an ultra-high-strength steel that is mainly used in precision forging dies and plastic mold manufacturing. The heat treatment process of this material is simple, the heat treatment deformation is extremely small, and it has excellent machining performance and welding performance.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICPå€17023219å·-3Region: -, Version: 26.09.18
