ABS-CF
Carbon Fiber ABS is an FDM composite material that adds chopped carbon fiber to the ABS matrix. It has the impact resistance and post-processability of ABS while improving rigidity, dimensional stability and reducing shrinkage. It is suitable for functional prototypes, fixtures and medium-sized end parts.
Moisture Resistance
High Strength
Wear Resistance
Lightweight
Lead Time
3~5 days
Tolerance
± 0.3% (minimum of ± 0.3mm)
Min. Order
1
Reference Unit Price Range
0.45 - 1.00
Advantages
- Mature post-processing compatibility
- Wear Resistance
- Rigidity
Disadvantages
- Limited chemical resistance
- Lower surface quality
- Limited toughness
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
Lightweight
高来源评分：4/5
Moisture Resistance
高来源评分：4/5
High Strength
高来源评分：4/5
Wear Resistance
高来源评分：4/5
Heat Resistance
中来源评分：3/5
Cost Efficient
中来源评分：3/5
Weather Resistance
中来源评分：3/5
Dimensional Stability
中来源评分：3/5
Rigidity
中来源评分：3/5
Surface Finish Options
Surface Finish Options
Available finish options for ABS-CF.
As Printed
Color
Black
Accuracy
± 0.3% (minimum of ± 0.3mm)
Painting
Finish options
Glossy and matte paint finishes available
Best for
为功能原型测试的ABS-CF零件添加自定义颜色和保护漆层。
Note
生产前验证ABS-CF上的漆膜附着力、遮蔽边界和涂层覆盖范围，特别是在界面、边缘和精细细节周围。
Silk Screening
Print method
Single- or multi-color graphics on flat or gently curved surfaces
Best for
将徽标、标签或功能性图形应用于用于功能原型测试的ABS-CF零件的平面区域。
Note
生产前确认ABS-CF上的可打印区域、油墨附着力和图形套准。
Industries & Applications
Where ABS-CF Delivers
Industrial Manufacturing
- Functional prototype testing
- End-use plastic parts
- Mounting brackets
- Jigs and fixtures
Equipment
- Functional prototype testing
- End-use plastic parts
- Mounting brackets
- Jigs and fixtures
Automotive
- Prototype and fit-check components
- Interior and non-safety-critical parts
- Custom fixtures and production aids
- Low-volume validation builds
Consumer Electronics
- Product enclosure prototypes
- Fit-check and assembly models
- Custom test fixtures
- Low-volume concept validation builds
Entertainment & Collectibles
- Display and concept models
- Collectible and figurine prototypes
- Prop and costume-fit components
- Low-volume creative production parts
Technical Specifications
Design Guidelines
Material Properties
Process & Dimensional Specs
Ready to Order?
Upload your 3D file and receive a quote for ABS-CF parts. Typical turnaround is 3~5 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
Compare & Decide
Related & Alternative Materials
FDM · Composites
Nylon 12 Carbon-filled
FDM · Black
Nylon 12 Carbon Fiber Fill combines Nylon 12 and cut carbon fiber to achieve the highest flexural strength and stiffness-to-weight ratio of any FDM material. Nylon 12CF offers the strength and stiffness of a metal alternative and is suitable for specific applications. Replace heavy metal tools with lighter, ergonomic carbon fiber FDM tools. Use carbon fiber functional prototypes to validate designs faster than expensive and time-consuming metal prototypes.
FDM · Composites
ASA-CF
FDM · Black
Carbon Fiber ASA is a carbon fiber reinforced composite material based on weather-resistant ASA. It has the characteristics of outdoor weather resistance, UV resistance, low warpage modification and high rigidity. It is suitable for outdoor shells, fixtures, brackets and automotive functional samples.
FDM · Composites
PET-CF
FDM · Black
Carbon Fiber PET is a carbon fiber reinforced FDM composite material based on PET. It emphasizes high rigidity, low moisture absorption, high temperature resistance, dimensional stability and good chemical resistance. It is suitable for structural brackets, tooling fixtures and engineering prototypes that require stable deformation control.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICP备17023219号-3Region: -, Version: 26.09.18
