Nylon 12 Carbon-filled
Nylon 12 Carbon Fiber Fill combines Nylon 12 and cut carbon fiber to achieve the highest flexural strength and stiffness-to-weight ratio of any FDM material. Nylon 12CF offers the strength and stiffness of a metal alternative and is suitable for specific applications. Replace heavy metal tools with lighter, ergonomic carbon fiber FDM tools. Use carbon fiber functional prototypes to validate designs faster than expensive and time-consuming metal prototypes.
Heat Resistance
Lightweight
Moisture Resistance
Dimensional Stability
High Strength
Lead Time
2~3 days
Tolerance
± 0.3% (minimum of ± 0.3mm)
Min. Order
1
Reference Unit Price Range
0.27 - 0.60
Advantages
- Rigidity
Disadvantages
- Limited weather resistance
- Limited toughness
- Lower surface quality
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
Heat Resistance
高来源评分：4/5
Lightweight
高来源评分：4/5
Moisture Resistance
高来源评分：4/5
Dimensional Stability
高来源评分：4/5
High Strength
高来源评分：4/5
Wear Resistance
高来源评分：4/5
Rigidity
高来源评分：4/5
Cost Efficient
中来源评分：3/5
Corrosion Resistance
中来源评分：3/5
Surface Finish Options
Surface Finish Options
Available finish options for Nylon 12 Carbon-filled.
As Printed
Color
Black
Surface
Ra 12-25 μm (as printed)
Accuracy
± 0.3% (minimum of ± 0.3mm)
Painting
Finish options
Glossy and matte paint finishes available
Best for
为Nylon 12 Carbon-filled零件添加自定义颜色和保护漆层，用于功能原型测试。
Note
生产前验证Nylon 12 Carbon-filled before production, especially around interfaces, edges, and fine details。
Silk Screening
Print method
Single- or multi-color graphics on flat or gently curved surfaces
Best for
将徽标、标签或功能性图形应用于用于Nylon 12 Carbon-filled零件的平面区域，用于功能原型测试。
Note
生产前确认Nylon 12 Carbon-filled before production。
Industries & Applications
Where Nylon 12 Carbon-filled Delivers
Industrial Manufacturing
- Functional prototype testing
- End-use plastic parts
- Assembly testing
- Mounting brackets
- Jigs and fixtures
Equipment
- Functional prototype testing
- End-use plastic parts
- Assembly testing
- Mounting brackets
- Guide rails and pulleys
Automotive
- Prototype and fit-check components
- Interior and non-safety-critical parts
- Custom fixtures and production aids
- Low-volume validation builds
Robotics
- Functional prototype testing
- End-use plastic parts
- Assembly testing
- Guide rails and pulleys
- Drone structural parts
Industrial Automation
- Functional prototype testing
- End-use plastic parts
- Assembly testing
- Guide rails and pulleys
- Jigs and fixtures
Technical Specifications
Design Guidelines
Material Properties
Process & Dimensional Specs
Ready to Order?
Upload your 3D file and receive a quote for Nylon 12 Carbon-filled parts. Typical turnaround is 2~3 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
Compare & Decide
Related & Alternative Materials
FDM · Composites
PA6-CF
FDM · Black
PA6-CF is a carbon fiber reinforced engineering plastic based on PA6, which combines the toughness and wear resistance of nylon with the strength and rigidity of carbon fiber. It has excellent structural properties and dimensional stability, making it ideal for demanding applications such as automotive parts, electronic housings, mechanical components, and high-strength 3D printed products.
SLS · Composites
Nylon 12 Glass-filled (Black)
SLS · Black
Nylon 12 Glass Filled (Black) has a black surface that is slightly grainy and porous. Nylon glass filling is more durable and resistant than nylon PA12. It gives you great freedom in design - both complex and enclosed volumes. This material is ideal for technical components requiring resistance and load. The surface accuracy is not as good as polyamide 12, but it meets the needs of technical parts.
SLS · Composites
Nylon 12 Glass-filled (Off White)
SLS · Off White
Nylon 12 glass filled (off-white) surface is white, slightly grainy and porous. Nylon glass filling is more durable and resistant than nylon PA12. It gives you great freedom in design - you can design complex volumes or realize enclosed spaces. This material is ideal for technical components requiring resistance and load. The surface accuracy is not as good as polyamide 12, but it meets the needs of technical parts.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICP备17023219号-3Region: -, Version: 26.09.18
