Aluminum (6061)
Aluminum alloy 6061 is an extremely versatile alloy known for its good balance of strength, corrosion resistance and formability. Due to its relatively low density and ease of machining, the material is widely used in industries such as aerospace, construction and automotive manufacturing. This makes 6061 one of the most commonly used aluminum alloys in the world, especially suitable for applications that have strict requirements on strength-to-weight ratio (strength-to-weight ratio). In addition, the alloy has excellent thermal and electrical conductivity properties, further enhancing its engineering design value for optimizing system efficiency without sacrificing performance.
Dimensional Stability
Toughness
Heat Resistance
Weather Resistance
Lightweight
Lead Time
6~10 days
Tolerance
± 0.2% (minimum of ± 0.2mm)
Min. Order
1
Reference Unit Price Range
0.63 - 1.40
Advantages
- Mature post-processing compatibility
- Widely used general-purpose alloy
- Heat-treatment capable
Disadvantages
- Higher cost
- Limited strength for demanding loads
- Lower surface quality
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
Lightweight
优秀来源评分：5/5
Heat Resistance
高来源评分：4/5
Weather Resistance
高来源评分：4/5
Thermal Conductivity
高来源评分：4/5
Dimensional Stability
高来源评分：4/5
Toughness
高来源评分：4/5
Corrosion Resistance
中来源评分：3/5
ESD Safe
中来源评分：3/5
Wear Resistance
中来源评分：3/5
Surface Finish Options
Surface Finish Options
Available finish options for Aluminum (6061).
As Printed
Color
Silvery-gray
Surface
Ra 12-25 μm (as-built SLM)
Accuracy
± 0.2% (minimum of ± 0.2mm)
Polishing
Surface result
Smoother, glossier visible surfaces where geometry allows
Best for
在几何形状允许的情况下，提高Aluminum (6061)最终用途金属零件的光滑度和光泽度。
Note
确认Aluminum (6061)的边缘保持性和尺寸影响；抛光过程中精细特征可能会变软。
Sand Blasting
Surface result
Uniform matte texture
Best for
为用于最终用途金属零件以及展示或功能原型的Aluminum (6061)零件创建均匀的哑光纹理。
Note
确认Aluminum (6061)的遮蔽和特征保持性；喷砂会改变纹理并软化精细细节。
Laser Engraving
Marking result
Permanent text, logo, or identification marking
Best for
为用于最终用途金属零件的Aluminum (6061)零件添加永久文字、徽标或标识。
Note
在生产前确认Aluminum (6061)的对比度、标记深度和热敏性。
Anodizing
Surface result
Protective anodized surface finish for aluminum parts
Best for
为用于最终用途金属零件的Aluminum (6061)零件进行阳极氧化处理。
Note
在对Aluminum (6061)进行阳极氧化之前，请确认材料兼容性、几何形状和验收标准。
Shot Peening
Surface effect
Compressive surface treatment for metal parts
Best for
改善用于最终用途金属零件和承重应用的Aluminum (6061)金属零件的表面状况。
Note
确认Aluminum (6061)的合金响应、尺寸公差和表面覆盖率；工艺设置会影响最终表面状况。
Heat Treatment
Mechanical result
Adjusted strength, hardness, or stress-relief depending on the alloy
Best for
调整用于最终用途金属零件和高要求功能用途的Aluminum (6061)零件的强度、硬度或应力状态。
Note
在生产前确认Aluminum (6061)的合金特定工艺周期、尺寸变化和后处理要求。
Industries & Applications
Where Aluminum (6061) Delivers
Industrial Manufacturing
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Mounting brackets
Equipment
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Mounting brackets
- Electronic device housings
Automotive
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Automotive functional parts
Aerospace
- Prototype and fit-check components
- Non-flight tooling and production aids
- Cabin and ground-support prototypes
- Low-volume engineering validation builds
Consumer Electronics
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Electronic device housings
Entertainment & Collectibles
- Display and concept models
- Collectible and figurine prototypes
- Prop and costume-fit components
- Low-volume creative production parts
Jewelry
- Design concept models
- Pattern and master-model development
- Display and presentation pieces
- Low-volume custom accessories
Fine Jewelry & Accessories
- Fine accessory concept models
- Pattern and master-model development
- Display and presentation pieces
- Low-volume custom accessories
Robotics
- Prototype end-effectors and brackets
- Custom assembly and test fixtures
- Low-volume functional validation builds
- Integration and fit-check components
Industrial Automation
- End-use metal parts
- Functional prototype testing
- Assembly testing
Technical Specifications
Design Guidelines
Material Properties
Process & Dimensional Specs
Ready to Order?
Upload your 3D file and receive a quote for Aluminum (6061) parts. Typical turnaround is 6~10 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
Compare & Decide
Related & Alternative Materials
SLM · Metals
Aluminum (AlSi10Mg)
SLM · Silvery-gray
AlSi10Mg is a relatively soft but versatile aluminum alloy material. Thanks to its relatively low cost, excellent machinability and formability, this material is widely used in many industrial fields and is currently one of the most commonly used metals. The construction industry is the main application area for this material, followed by general engineering. AlSi10Mg exhibits excellent thermal and electrical conductivity. Its thermal conductivity is about one-half that of copper, and its electrical conductivity is about two-thirds that of copper.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICP备17023219号-3Region: -, Version: 26.09.08
