Nylon 12 Glass-filled (Black)
Nylon 12 Glass Filled (Black) has a black surface that is slightly grainy and porous. Nylon glass filling is more durable and resistant than nylon PA12. It gives you great freedom in design - both complex and enclosed volumes. This material is ideal for technical components requiring resistance and load. The surface accuracy is not as good as polyamide 12, but it meets the needs of technical parts.
Moisture Resistance
Dimensional Stability
Wear Resistance
Lead Time
3~5 days
Tolerance
± 0.3% (minimum of ± 0.3mm)
Min. Order
1
Reference Unit Price Range
0.28 - 0.62
Advantages
- Mature post-processing compatibility
- Black finish that helps conceal marks
- Functional use without post-processing
Disadvantages
- Limited heat resistance
- Limited weather resistance
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
Moisture Resistance
高来源评分：4/5
Dimensional Stability
高来源评分：4/5
Wear Resistance
高来源评分：4/5
Cost Efficient
中来源评分：3/5
Corrosion Resistance
中来源评分：3/5
Surface Quality
中来源评分：3/5
Lightweight
中来源评分：3/5
High Strength
中来源评分：3/5
Rigidity
中来源评分：3/5
Surface Finish Options
Surface Finish Options
Available finish options for Nylon 12 Glass-filled (Black).
As Printed
Color
Black
Surface
Ra 10-18 μm (as printed)
Accuracy
± 0.3% (minimum of ± 0.3mm)
Dyeing
Color result
Black dye finish
Best for
在功能原型测试需要颜色一致时，为玻璃填充尼龙12（黑色）零件添加均匀的黑色表面处理。
Note
量产前请确认玻璃填充尼龙12（黑色）的染色渗透性、颜色一致性和尺寸变化。
Painting
Finish options
Glossy and matte paint finishes available
Best for
为玻璃填充尼龙12（黑色）零件添加自定义颜色和保护漆层，用于功能原型测试。
Note
量产前请验证玻璃填充尼龙12（黑色）的油漆附着力、遮蔽边界和涂层覆盖率，特别是在接口、边缘和精细细节周围。
Vapor Smoothing
Surface result
Chemically smoothed surfaces with reduced layer lines
Best for
减少玻璃填充尼龙12（黑色）零件上可见的层纹，用于功能原型测试和外观要求严格的原型。
Note
在蒸汽平滑处理前，请确认玻璃填充尼龙12（黑色）的材料兼容性、特征保留性和尺寸影响。
Sand Blasting
Surface result
Uniform matte texture
Best for
在玻璃填充尼龙12（黑色）零件上创建均匀的哑光纹理，用于功能原型测试以及展示或功能原型。
Note
请确认玻璃填充尼龙12（黑色）的遮蔽和特征保留；磨料喷砂会改变纹理并柔化精细细节。
Industries & Applications
Where Nylon 12 Glass-filled (Black) Delivers
Industrial Manufacturing
- Functional prototype testing
- End-use plastic parts
- Assembly testing
- Mounting brackets
- Jigs and fixtures
Equipment
- Functional prototype testing
- End-use plastic parts
- Assembly testing
- Mounting brackets
- Jigs and fixtures
Automotive
- Functional prototype testing
- End-use plastic parts
- Assembly testing
- Automotive functional parts
Robotics
- Functional prototype testing
- End-use plastic parts
- Assembly testing
- Drone structural parts
- Robotics structural parts
Industrial Automation
- Functional prototype testing
- End-use plastic parts
- Assembly testing
- Jigs and fixtures
- Robotics structural parts
Technical Specifications
Design Guidelines
Material Properties
Process & Dimensional Specs
Ready to Order?
Upload your 3D file and receive a quote for Nylon 12 Glass-filled (Black) parts. Typical turnaround is 3~5 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
Compare & Decide
Related & Alternative Materials
SLS · Composites
Nylon 6 Glass-filled (Black)
SLS · Black
PA6GF is a glass fiber reinforced PA6 (nylon 6) powder material. The material offers excellent rigidity, heat resistance and corrosion resistance. It is suitable for functional component verification and low-volume production, and can be used as a substitute for CNC machining and injection molded parts. It is especially suitable for various applications in the automotive, electronics and other industries.
SLS · Nylons
Nylon 12 (Black)
SLS · Black
Striking a balance between strength and detail, SLS Nylon 12 is a high-performance material suitable for both functional prototyping and final production of complex assemblies and durable parts with extremely high environmental stability.
SLS · Nylons
Nylon 12 Pro (Black)
SLS · Black
Black nylon 12 Pro is based on Evonik basic material improvements and matches optimized printing parameters. With white nylon 12 as the core, this material has better detail expression and toughness. Even small holes and tiny features of 0.4-0.6mm can be printed clearly while maintaining stable dimensional accuracy. Recommended for small batch production, available in native black, and can also be spray painted in various colors upon request.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICP备17023219号-3Region: -, Version: 26.09.18
