SS17-4PH
The strength and hardness of 17-4PH precipitation hardened stainless steel can be significantly improved through heat treatment after sintering. The color of its printed parts is dark gray to black gray in the sintered state. It has good mechanical properties and moderate corrosion resistance, and is suitable for structural parts that require both strength and precision.
Dimensional Stability
High Strength
Wear Resistance
Toughness
Rigidity
Lead Time
6~10 days
Tolerance
± 0.3% (minimum of ± 0.3mm)
Min. Order
1
Reference Unit Price Range
0.27 - 0.60
Advantages
- Heat-treatment capable
- High Strength
Disadvantages
- Higher weight
- Lower surface quality
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
Heat Resistance
優秀評価スコア：5/5
Dimensional Stability
優秀評価スコア：5/5
High Strength
優秀評価スコア：5/5
Rigidity
優秀評価スコア：5/5
Weather Resistance
高い評価スコア：4/5
Corrosion Resistance
高い評価スコア：4/5
Wear Resistance
高い評価スコア：4/5
Toughness
高い評価スコア：4/5
Cost Efficient
中評価スコア：3/5
Surface Finish Options
Surface Finish Options
Available finish options for SS17-4PH.
As Printed
Color
Gray-Black
Surface
Ra 6-12 μm (as printed)
Accuracy
± 0.3% (minimum of ± 0.3mm)
Polishing
Surface result
Smoother, glossier visible surfaces where geometry allows
Best for
形状が許す場合に、最終用途金属部品に使用される SS17-4PH 部品の平滑性と光沢を向上させます。
Note
SS17-4PH のエッジ保持性と寸法への影響を確認してください。微細な特徴部は研磨中に軟化する可能性があります。
Sand Blasting
Surface result
Uniform matte texture
Best for
最終用途金属部品ならびにディスプレイ用または機能プロトタイプに使用される SS17-4PH 部品に、均一なマットなテクスチャを作成します。
Note
SS17-4PH のマスキングと特徴保持を確認してください。ブラスト処理により、テクスチャが変化し、微細なディテールが軟化する可能性があります。
Laser Engraving
Marking result
Permanent text, logo, or identification marking
Best for
最終用途金属部品に使用される SS17-4PH 部品に、恒久的なテキスト、ロゴ、または識別マーキングを追加します。
Note
生産前に、SS17-4PH のコントラスト、マーキング深度、熱感受性を確認してください。
Shot Peening
Surface effect
Compressive surface treatment for metal parts
Best for
最終用途金属部品および荷重支持用途に使用される SS17-4PH 金属部品の表面状態を改善します。
Note
SS17-4PH の合金の応答性、寸法公差、表面被覆率を確認してください。プロセス設定が最終的な表面状態に影響します。
Heat Treatment
Mechanical result
Adjusted strength, hardness, or stress-relief depending on the alloy
Best for
最終用途金属部品および過酷な機能用途向けに、SS17-4PH 部品の強度、硬度、または応力状態を調整します。
Note
生産前に、SS17-4PH の合金特有の熱処理サイクル、寸法変化、後処理要件を確認してください。
Industries & Applications
Where SS17-4PH Delivers
Industrial Manufacturing
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Mounting brackets
- Deformation-resistant functional parts
Equipment
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Energy equipment parts
- Mounting brackets
Automotive
- Prototype and fit-check components
- Interior and non-safety-critical parts
- Custom fixtures and production aids
- Low-volume validation builds
Aerospace
- End-use metal parts
- Functional prototype testing
- Assembly testing
- Aerospace structural parts
Jewelry
- Design concept models
- Pattern and master-model development
- Display and presentation pieces
- Low-volume custom accessories
Fine Jewelry & Accessories
- Fine accessory concept models
- Pattern and master-model development
- Display and presentation pieces
- Low-volume custom accessories
Robotics
- Prototype end-effectors and brackets
- Custom assembly and test fixtures
- Low-volume functional validation builds
- Integration and fit-check components
Industrial Automation
- End-use metal parts
- Functional prototype testing
- Assembly testing
Technical Specifications
Design Guidelines
Material Properties
Process & Dimensional Specs
Ready to Order?
Upload your 3D file and receive a quote for SS17-4PH parts. Typical turnaround is 6~10 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
Compare & Decide
Related & Alternative Materials
MBJ · Metals
SS316L
MBJ · Gray-Black
In the MBJ process, 316L stainless steel usually appears silver gray to dark gray after sintering due to its excellent corrosion resistance and toughness, making it an ideal choice for preparing fluid parts with complex structures.
SLM · Metals
17-4PH Stainless Steel
SLM · Silvery-gray
17-4 PH stainless steel is a martensitic precipitation hardening stainless steel. The material is known for its excellent corrosion resistance and extremely high strength and hardness, especially after heat treatment. 17-4 PH can be adjusted to different hardness and toughness levels through heat treatment, allowing users to tailor the properties of the alloy after sintering to suit a wide range of application scenarios, including: mechanical equipment, chemical processing, food processing, pump components, valves, fasteners, jigs and fixtures.
SLM · Metals
316L Stainless Steel
SLM · Silvery-gray
316L stainless steel is one of the most commonly used stainless steel grades in 3D printing. Thanks to the extremely high temperature gradient and extremely fast solidification rate during the printing process, the material's mechanical properties after molding are better than traditional castings (although some printers also support printing in 17-4 PH stainless steel). 316L is a metal with strong mechanical properties. The printed surface is usually rough and has pitting (melt pool marks). The material can provide a variety of polished or matte post-processing effects and is widely used in jewelry, functional parts, small sculptures and other fields.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICP备17023219号-3Region: -, Version: 26.09.0202
