PA6-CF
PA6-CF is a carbon fiber reinforced engineering plastic based on PA6, which combines the toughness and wear resistance of nylon with the strength and rigidity of carbon fiber. It has excellent structural properties and dimensional stability, making it ideal for demanding applications such as automotive parts, electronic housings, mechanical components, and high-strength 3D printed products.
Lightweight
Dimensional Stability
High Strength
Wear Resistance
Rigidity
Lead Time
3~5 days
Tolerance
± 0.3% (minimum of ± 0.3mm)
Min. Order
1
Reference Unit Price Range
0.32 - 0.70
Advantages
- High Strength
- Rigidity
Disadvantages
- Moisture sensitivity
- Very limited performance
- Limited weather resistance
- Limited chemical resistance
- Limited toughness
- Lower surface quality
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
High Strength
优秀来源评分：5/5
Rigidity
优秀来源评分：5/5
Lightweight
高来源评分：4/5
Dimensional Stability
高来源评分：4/5
Wear Resistance
高来源评分：4/5
Heat Resistance
中来源评分：3/5
Cost Efficient
中来源评分：3/5
Weather Resistance
低来源评分：2/5
Corrosion Resistance
低来源评分：2/5
Surface Finish Options
Surface Finish Options
Available finish options for PA6-CF.
As Printed
Color
Black
Surface
Ra 12-25 μm (as printed)
Accuracy
± 0.3% (minimum of ± 0.3mm)
Painting
Finish options
Glossy and matte paint finishes available
Best for
为功能原型测试的PA6-CF零件添加自定义颜色和保护漆层。
Note
生产前验证PA6-CF上的漆膜附着力、遮蔽边界和涂层覆盖范围，特别是在界面、边缘和精细细节周围。
Silk Screening
Print method
Single- or multi-color graphics on flat or gently curved surfaces
Best for
将徽标、标签或功能性图形应用于用于功能原型测试的PA6-CF零件的平面区域。
Note
生产前确认PA6-CF上的可打印区域、油墨附着力和图形套准。
Industries & Applications
Where PA6-CF Delivers
Industrial Manufacturing
- Functional prototype testing
- End-use plastic parts
- Jigs and fixtures
- Deformation-resistant functional parts
- Mounting brackets
Equipment
- Functional prototype testing
- End-use plastic parts
- Jigs and fixtures
- Mounting brackets
- Guide rails and pulleys
Automotive
- Prototype and fit-check components
- Interior and non-safety-critical parts
- Custom fixtures and production aids
- Low-volume validation builds
Robotics
- Functional prototype testing
- End-use plastic parts
- Guide rails and pulleys
- Drone structural parts
- Robotics structural parts
Industrial Automation
- Functional prototype testing
- End-use plastic parts
- Jigs and fixtures
- Guide rails and pulleys
- Robotics structural parts
Technical Specifications
Design Guidelines
Material Properties
Process & Dimensional Specs
Ready to Order?
Upload your 3D file and receive a quote for PA6-CF parts. Typical turnaround is 3~5 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
Compare & Decide
Related & Alternative Materials
FDM · Composites
Nylon 12 Carbon-filled
FDM · Black
Nylon 12 Carbon Fiber Fill combines Nylon 12 and cut carbon fiber to achieve the highest flexural strength and stiffness-to-weight ratio of any FDM material. Nylon 12CF offers the strength and stiffness of a metal alternative and is suitable for specific applications. Replace heavy metal tools with lighter, ergonomic carbon fiber FDM tools. Use carbon fiber functional prototypes to validate designs faster than expensive and time-consuming metal prototypes.
SLS · Composites
Nylon 6 Glass-filled (Black)
SLS · Black
PA6GF is a glass fiber reinforced PA6 (nylon 6) powder material. The material offers excellent rigidity, heat resistance and corrosion resistance. It is suitable for functional component verification and low-volume production, and can be used as a substitute for CNC machining and injection molded parts. It is especially suitable for various applications in the automotive, electronics and other industries.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICP备17023219号-3Region: -, Version: 26.09.08
