MJF Nylon 12 Glass Bead
MJF Nylon 12 Glass Bead is an HP® Multi Jet Fusion nylon material designed for heat resistance, dimensional stability, wear resistance, and high rigidity. It is suitable for assembly and fit checks, functional prototype testing, and low-volume end-use plastic parts, with selection based on the part geometry, load case, and finishing requirements.
Heat Resistant
Dimensionally Stable
Wear Resistant
High Rigidity
Lightweight
Lead Time
3~5 days
Min. Order
± 0.3% (minimum of ± 0.3mm)
Reference Unit Price Range
1
Tolerance
0.53 - 1.17
最適な用途
- Low-volume end-use plastic parts
- Functional prototype testing
- Assembly and fit checks
- Housings and enclosures
- Complex internal channels and enclosed geometries
- Wear-resistant moving parts
- Brackets and structural supports
- Jigs and fixtures
不向きな用途
- Heavy-load metal replacement structures
- High-impact or drop-tested parts
- High-speed friction or precision transmission parts
- Long-term outdoor UV exposure
- Long-term water immersion or high-humidity precision parts
- End-use parts requiring a very smooth surface
- Ultra-high-precision assemblies
- Closed cavities that cannot be cleaned
- Parts exposed to long-term outdoor sunlight
- Parts under sustained long-term load
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
評価スコア：5/5
評価スコア：4/5
評価スコア：4/5
評価スコア：4/5
評価スコア：3/5
評価スコア：3/5
評価スコア：3/5
評価スコア：3/5
評価スコア：2/5
表面仕上げオプション
表面仕上げオプション
MJF ナイロン12グラスビーズで利用可能な仕上げオプション。
As Printed
色
Black
表面
Ra 8-14 μm (as printed)
精度
± 0.3% (minimum of ± 0.3mm)
染色
色結果
Black dye finish
最適な用途
機能プロトタイプ試験で一貫した色が必要なMJFナイロン12グラスビーズ部品に、均一な黒色仕上げを追加します。
注意点
生産前に、MJFナイロン12グラスビーズの染色浸透性、色の一貫性、寸法変化を確認してください。
塗装
仕上げオプション
Glossy and matte paint finishes available
最適な用途
MJFナイロン12グラスビーズ部品にカスタムカラーと保護塗料層を追加し、機能プロトタイプ試験に使用します。
注意点
生産前に、特に接合部、エッジ、微細なディテール周辺のMJFナイロン12グラスビーズの塗料密着性、マスキング境界、コーティング被覆率を検証してください。
ベーパースムージング
表面結果
Chemically smoothed surfaces with reduced layer lines
最適な用途
機能プロトタイプ試験および外観重視のプロトタイプに使用されるMJFナイロン12グラスビーズ部品の積層線を目立たなくします。
注意点
ベーパースムージング前に、MJFナイロン12グラスビーズの材料適合性、形状保持性、寸法への影響を確認してください。
サンドブラスト
表面結果
Uniform matte texture
最適な用途
機能プロトタイプ試験ならびに展示用または機能プロトタイプに使用されるMJFナイロン12グラスビーズ部品に、均一なマットな質感を作成します。
注意点
MJFナイロン12グラスビーズのマスキングと形状保持性を確認してください；ブラスト処理により質感が変化し、微細なディテールが柔らかくなる場合があります。
Industries & Applications
Where MJF Nylon 12 Glass Bead Delivers
Engineering / Industrial Applications
- Form and fit testing
- Functional prototyping and testing
- Low-volume end-use plastic parts
Consumer Electronics / Entertainment
- Brackets
- High-temperature jigs and fixtures
- Wear-resistant moving parts
Technical Specifications
Design Guidelines
Dimensional & Process
Emboss: min. 0.8 mm
Engrave: min. 0.8 mm
Material Properties
121 °C (@1.8 MPa)
Z: 30 MPa
Z: 6.5%
Ready to Order
Upload your 3D file and receive a quote for MJF Nylon 12 Glass Bead parts. Typical turnaround is 3~4 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
Compare & Decide
Related & Alternative Materials
HP Multi Jet Fusion · Nylons
MJF Nylon 12 (Raw Grey)
HP Multi Jet Fusion · Raw Grey
The nylon material has excellent mechanical properties, and its strength and density exceed parts produced by other powder bed printing technologies. Its excellent strength makes it an excellent choice for functional components such as drone parts, remote control car accessories, mechanical fixtures, camera brackets and mobile phone cases. Its surface is semi-glossy and slightly grainy, and it is also very suitable for making jewelry, home decoration, toys and game props. HP nylon plastic can be considered a general purpose plastic with a wide range of applications.
SLS · Composites
Nylon 12 Glass-filled (Black)
SLS · Black
Nylon 12 Glass Filled (Black) has a black surface that is slightly grainy and porous. Nylon glass filling is more durable and resistant than nylon PA12. It gives you great freedom in design - both complex and enclosed volumes. This material is ideal for technical components requiring resistance and load. The surface accuracy is not as good as polyamide 12, but it meets the needs of technical parts.
SLS · Composites
Nylon 6 Glass-filled (Black)
SLS · Black
PA6GF is a glass fiber reinforced PA6 (nylon 6) powder material. The material offers excellent rigidity, heat resistance and corrosion resistance. It is suitable for functional component verification and low-volume production, and can be used as a substitute for CNC machining and injection molded parts. It is especially suitable for various applications in the automotive, electronics and other industries.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICP备17023219号-3Region: -, Version: 26.09.0202
