MJF Nylon 12 (Raw Grey)
MJF Nylon 12 (Raw Grey) is an HP® Multi Jet Fusion nylon material designed for a lightweight design, moisture resistance, dimensional stability, and wear resistance. It is suitable for assembly and fit checks, functional prototype testing, and low-volume end-use plastic parts, with selection based on the part geometry, load case, and finishing requirements.
Lightweight
Moisture Resistant
Dimensionally Stable
Wear Resistant
Tough
Lead Time
3~5 days
Min. Order
± 0.3% (minimum of ± 0.3mm)
Reference Unit Price Range
1
Tolerance
0.32 - 0.72
最適な用途
- Low-volume end-use plastic parts
- Functional prototype testing
- Assembly and fit checks
- Housings and enclosures
- Complex internal channels and enclosed geometries
- Wear-resistant moving parts
- Moving parts, hinges, and snap-fits
不向きな用途
- Heavy-load metal replacement structures
- High-speed friction or precision transmission parts
- Continuous high-temperature service
- Long-term outdoor UV exposure
- End-use parts requiring a very smooth surface
Performance Snapshot
Material Characteristics at a Glance
Relative performance profile across key engineering parameters. Values are contextual — not absolute stress ratings.
評価スコア：5/5
評価スコア：4/5
評価スコア：4/5
評価スコア：4/5
評価スコア：4/5
評価スコア：3/5
評価スコア：3/5
評価スコア：3/5
評価スコア：3/5
表面仕上げオプション
表面仕上げオプション
MJF ナイロン12（生グレー）で利用可能な仕上げオプション。
As Printed
色
Raw Grey
表面
Ra 6-12 μm (as printed)
精度
± 0.3% (minimum of ± 0.3mm)
染色
色結果
Black dye finish
最適な用途
機能プロトタイプ試験で一貫した色が必要なMJFナイロン12（生グレー）部品に、均一な黒色仕上げを追加します。
注意点
生産前に、MJFナイロン12（生グレー）の染色浸透性、色の一貫性、寸法変化を確認してください。
塗装
仕上げオプション
Glossy and matte paint finishes available
最適な用途
MJFナイロン12（生グレー）部品にカスタムカラーと保護塗料層を追加し、機能プロトタイプ試験に使用します。
注意点
生産前に、特に接合部、エッジ、微細なディテール周辺のMJFナイロン12（生グレー）の塗料密着性、マスキング境界、コーティング被覆率を検証してください。
ベーパースムージング
表面結果
Chemically smoothed surfaces with reduced layer lines
最適な用途
機能プロトタイプ試験および外観重視のプロトタイプに使用されるMJFナイロン12（生グレー）部品の積層線を目立たなくします。
注意点
ベーパースムージング前に、MJFナイロン12（生グレー）の材料適合性、形状保持性、寸法への影響を確認してください。
サンドブラスト
表面結果
Uniform matte texture
最適な用途
機能プロトタイプ試験ならびに展示用または機能プロトタイプに使用されるMJFナイロン12（生グレー）部品に、均一なマットな質感を作成します。
注意点
MJFナイロン12（生グレー）のマスキングと形状保持性を確認してください；ブラスト処理により質感が変化し、微細なディテールが柔らかくなる場合があります。
Industries & Applications
Where MJF Nylon 12 (Raw Grey) Delivers
Engineering / Industrial Applications
- Form and fit testing
- Functional prototyping and testing
- Low-volume end-use plastic parts
Manufacturing
- Functional prototyping and testing
- Low-volume end-use plastic parts
- Housings
Consumer Electronics / Entertainment
- Housings
- Wear-resistant moving parts
- Complex internal channels, flow paths, and lattice structures
Technical Specifications
Design Guidelines
Dimensional & Process
Engrave: min. 0.6 mm
Material Properties
95 °C (@1.8 MPa)
Z: 48 MPa
Z: 15%
Ready to Order
Upload your 3D file and receive a quote for MJF Nylon 12 (Raw Grey) parts. Typical turnaround is 3~4 days from order confirmation.
Every order includes: Dimensional inspection report · NDA-ready file handling · Pre-shipment QC photography · DDP door-to-door logistics · Engineering review on request
Compare & Decide
Related & Alternative Materials
HP Multi Jet Fusion · Composites
MJF Nylon 12 Glass Bead
HP Multi Jet Fusion · Black
MJF nylon 12 glass bead reinforcement is a high-performance material designed for the production of highly durable, functional parts. The material contains 40% glass beads (Glass Beads), which provides excellent rigidity, dimensional stability and repeatability (consistency). It is an ideal choice for applications requiring high rigidity such as casings, chassis, fixtures and tools.
SLS · Nylons
Nylon 12 Pro (Black)
SLS · Black
Black nylon 12 Pro is based on Evonik basic material improvements and matches optimized printing parameters. With white nylon 12 as the core, this material has better detail expression and toughness. Even small holes and tiny features of 0.4-0.6mm can be printed clearly while maintaining stable dimensional accuracy. Recommended for small batch production, available in native black, and can also be spray painted in various colors upon request.
SLS · Nylons
Nylon 12 (White)
SLS · White
SLS nylon 12 perfectly balances strength and detail performance. It is a very versatile material suitable for manufacturing complex assemblies and durable terminal parts with high environmental stability, taking into account functional prototype verification and small batch production requirements.
Unionfab is China's Largest 3D Printing Manufacturing Company for Rapid Prototyping and On-Demand Production Parts.
沪ICP备17023219号-3Region: -, Version: 26.09.0202
